A Full Guide To ISO 14001 Certification In Malaysia

A Full Guide To ISO 14001 Certification In Malaysia

In Malaysia, an organisation receives ISO 14001 certification when an accredited independent certification body verifies it runs an environmental management system (EMS) that meets the international standard.

picture of pollution in Malaysia to show the advantage of getting iso 14001 certification
You can say this isn’t your fault!

As readers likely know ISO 14001 is not mandatory but have reason to obtain it, our guide sticks to the practicalities of getting certified, broken down into:

  • the role of a certification body
  • eligibility requirements
  • supporting EMS documentation
  • steps in the certification process
  • a brief note on the 2026 edition
  • the ISO 14001, ISO 9001 and ISO 45001 link, and
  • certification costs

Of course, you’re welcome to skip the guide and get in touch for help!

Otherwise, let’s begin.

The role of a certification body

If this is your first ISO certification, know that ISO itself doesn’t certify anyone. Instead, certification is carried out by independent certification bodies accredited by the Department of Standards Malaysia.

There are many such bodies in Malaysia each allowed to set their own fees, application processes, and requirements (so long as they comply with ISO standards).

Sample ISO 14001 Malaysia certificate
That’s why you’ll see many ISO 14001 certificate designs.

Regardless, the role of a certification body is always strictly to:

  • audit your EMS against the requirements of ISO 14001
  • raise any nonconformities it finds for you to address
  • recommend and issue your certificate once all requirements are met
  • carry out surveillance and recertification audits to keep your certificate valid

They must remain impartial and cannot help build your EMS in any way. For that, you’d need to engage a consultant separate from the certification body that audits you.

Eligibility requirements

Any organisation in Malaysia regardless of size and sector can be ISO 14001 certified so long as they have an EMS that can satisfy its requirements.

This doesn’t necessarily mean you need an operational EMS when you apply, but before a certification body can recommend you for certification, you must demonstrate:

  • a defined scope and an environmental policy signed off by top management
  • your environmental aspects and impacts identified, with the significant ones flagged
  • a register of your compliance obligations, such as the Environmental Quality Act 1974 and the Environmental Quality (Scheduled Wastes) Regulations 2005 where they apply
  • environmental objectives with measurable targets
  • records showing the system has been operating for a period of time
  • at least one full internal audit and one management review completed

Each body sets their own expectations on how long the system must have run, and all require you to prepare and maintain the same EMS documentation.

EMS supporting documentation

Your EMS documentation is a list of all the information ISO 14001 requires you to make available.

sample ems manual front page for iso 14001 certification
A typical EMS manual.

This falls into two types:

TypeWhat it meansExamples
Documentsliving documents you keep up to date
  • scope of the EMS
  • environmental policy
  • environmental aspects and significance criteria
  • compliance obligations
  • environmental objectives
  • operational controls
  • emergency preparedness and response
Recordsevidence that something happened
  • staff competence
  • communications
  • monitoring and measurement results
  • compliance evaluation results
  • internal audit programme and results
  • management review results
  • nonconformities and corrective actions

Most organisations compile this into a single EMS manual as it’s more convenient to prepare and revise. Like all good manuals, it doesn’t have to look fancy, but it does have to be complete.

If you want an example, check out this EMS manual from a wastewater utility organisation in the US.

sample EMS manual table of contents
The audit will verify all this, and probably more.

Note: The example above is not meant to be used as a template, as every EMS must be tailored to fit the applicant’s operations. It’s simply here to give you more clarity on what you need to prepare!

Certification steps

Each body sets their own specific process, but there are generally seven main steps:

StepStageDescription
1QuestionnaireSubmit the questionnaire in the application package so the certification body can prepare a quotation.
2ApplicationAccept the quotation, then submit the application form with the application fee. An audit team leader is appointed to your file.
3Stage 1 auditThe auditors check your EMS documentation and whether you are ready for Stage 2.
4Stage 2 auditOnce Stage 1 findings are resolved, the auditors assess how well your EMS is implemented and how effective it is.
5RecommendationAfter any nonconformities are verified as closed, the audit team leader sends a recommendation report to the Certification Panel.
6ApprovalThe Certification Panel reviews and approves the recommendation.
7CertificateThe certificate is issued once all fees are paid and the Certification Agreement is signed.

How long this takes depends on the size of your operation but as a general estimate expect it to take 3 – 6 months.

Let’s go over what some of these steps involve in slightly more detail.

Stage 1 audit

The Stage 1 audit is a paperwork stage to see if your EMS documentation is adequate enough for you to proceed to Stage 2. Auditors will typically review your:

  • scope
  • policy
  • aspects
  • register
  • compliance obligations and
  • objectives

They then confirm that internal audits and management reviews are planned or done.

Stage 2 audit

The Stage 2 audit is a site visit to evaluate how your EMS is implemented and where auditors verify that what your documents say is actually happening, so expect them to:

  • walk your site
  • interview staff,
  • inspect areas such as chemical storage and scheduled waste handling, and
  • compare your records against your procedures

The audit team leader then prepares a recommendation for certification.

Or, more likely, they raise some issues first!

Addressing nonconformities

No matter how carefully you prepare, chances are the auditors will find areas that don’t meet the standard. These are raised as nonconformities, usually graded as:

  • minor: an isolated lapse that doesn’t undermine the system as a whole
  • major: a requirement is not met at all, or the system has broken down in a way that puts its results at risk

You will be given a deadline to respond with a correction and a corrective action plan that fixes the root cause. Certification bodies set their own response deadlines, so check your audit report.

The audit team leader will only recommend you for certification once your nonconformities have been verified. If the follow-up shows no further issues, your certification will be issued, which is valid for three years.

And now you have your certificate, let’s see what it takes to keep it.

Surveillance audits

Once certified, you will have one surveillance audit every year (twice a year in exceptional cases) to confirm your EMS is still being properly implemented and improved.

Surveillance audits are shorter than the initial audits and focus on sampled areas, recent changes and progress on your objectives.

Validity & recertification

Briefly, an ISO 14001 certificate is valid for three years, with a recertification audit in the third year that must be completed satisfactorily before the certificate expires.

Since your EMS was already assessed during initial certification, recertification doesn’t start from scratch. Auditors review the system’s performance over the full three years and confirm it is still effective.

A note on ISO 14001:2026

ISO 14001:2026 was published in April 2026 and refines the 2015 version. If you’re starting now, build your EMS to the 2026 edition from the outset.

iso 14001 2026 preview

Click the link to see a preview for more details, but briefly, main changes include:

  • a wider view of environmental conditions such as climate change, pollution, biodiversity and resource availability
  • clearer leadership accountability for environmental performance
  • tighter scrutiny of suppliers and other externally provided processes, products and services
  • a new clause on managing changes and a restructured approach to risks and opportunities
  • documented internal audit programmes with defined objectives

If you’re already certified to the 2015 edition, there’s a three-year transition period, and certificates must move to the 2026 edition by 2029 to remain valid.

The ISO 14001, ISO 9001 & ISO 45001 link

company showing ISO 45001, ISO 9001, and ISO 14001 certification obtained simultaneously
The ISO hat trick.

Let’s first clarify what these three management system standards cover:

  • ISO 14001 is for environmental management, controlling your impact on the environment
  • ISO 45001 is for occupational health and safety, protecting your workers from injury and ill health
  • ISO 9001 is for quality management, ensuring products and services consistently meet requirements

All three follow the same clause numbering and have many shared requirements, so one set of core procedures can serve all three and as many companies that need ISO 14001 also need ISO 9001 or ISO 45001, it often makes sense to get them all done in one go.

Naturally, certification bodies often offer combined audits of two or more management systems so one audit team can handle all your certification needs at a better rate and a more convenient schedule.

Our advice is if you need two or more of the above, build an integrated system and apply together.

Now we reach the final section, and we apologise in advance as it boils down to ‘it depends’!

Certification costs

There is no fixed fee schedule for ISO 14001 certification, and each certification body will quote you an estimate that depends on:

  • organisation size
  • certification scope
  • number of employees
  • location
  • whether you’re applying for other ISO certifications at the same time

Most certification bodies have an enquiry form that makes it very easy for you to enter your details and receive a quote, so you can submit a few to find the best deal. Based on our experience, if you will need the help of a consultant as well, be prepared to spend around RM25,000.

Additionally, once certified, you can claim a double deduction on your certification fees.

How double deduction works

Under Paragraph 34 of the Income Tax Act 1967, as long as your certification body is accredited, you can deduct twice what you paid from your taxable income in the year of assessment the certificate is issued.

For example, if you spend RM10,000 on certification, you can deduct RM20,000 from your taxable income. At a 24% tax rate, that saves RM4,800; at 15% it saves RM3,000.

However, only fees charged by the certification body qualify. Consultant fees and capital expenditure doesn’t entitle you to double deduction (but may still qualify for other tax benefits).

That’s it from us, and we wish you all the best with getting certified 😊

Let MISHU support your ISO 14001 certification

Directly and through our partners, MISHU regularly assists operations in Malaysia with applying for various licenses from district and federal agencies. Speak to us today if you’d like help getting your business ISO 14001-certified!

Leave a Reply

Your email address will not be published. Required fields are marked *

please include country code

Scroll to top