A Full Guide To ISO 45001 Certification In Malaysia
In Malaysia, an organisation receives ISO 45001 certification when an accredited independent certification body verifies it has an occupational health and safety management system (OH&S MS) that satisfies the international standard.

As readers likely know ISO 45001 is neither mandatory nor a substitute for an employer’s legal duties under the Occupational Safety and Health Act 1994, our guide sticks to the practicalities of getting certified, broken down into:
- the role of a certification body
- eligibility requirements
- supporting OH&S MS documentation
- steps in the certification process
- a brief note on the upcoming revision
- the ISO 45001, ISO 14001 and ISO 9001 link, and
- certification costs
Of course, you’re welcome to skip the guide and get in touch for help!
Otherwise, let’s begin.
The role of a certification body
If this is your first ISO certification, the actual certification is carried out by independent certification bodiesaccredited by the Department of Standards Malaysia.
There are many such bodies in Malaysia, each allowed to set their own fees, application processes and requirements (so long as they comply with ISO standards).

These bodies are required to remain impartial and forbidden from helping you develop your OH&S MS in any way. Instead, their role is always strictly to:
- audit your OH&S MS against the requirements of ISO 45001
- raise any nonconformities it finds for you to address
- recommend and issue your certificate once all requirements are met, and
- carry out surveillance and recertification audits to keep your certificate valid
For help developing a compliant process and documentation, you’d need to engage an ISO consultant separate from the certification body that audits you.
Eligibility requirements
Any organisation in Malaysia, regardless of size or sector, can be ISO 45001 certified, so long as it has an OH&S MS that meets the standard’s requirements.
This doesn’t necessarily mean you need an operational OH&S MS when you apply, but before a certification body can recommend you for certification, you must demonstrate:
- a defined scope and an OH&S policy signed off by top management
- your workplace hazards identified and OH&S risks assessed, with controls in place
- a register of your legal requirements, such as the Occupational Safety and Health Act 1994 and its regulations, including the Occupational Safety and Health (Use and Standards of Exposure of Chemicals Hazardous to Health) Regulations 2000 where they apply
- evidence that workers are consulted and participate in the system, such as through a safety and health committee
- OH&S objectives with measurable targets
- records showing the system has been operating for a period of time
- at least one full internal audit and one management review completed
Each body sets its own expectations on how long the system must have run, and all require you to prepare and maintain the same OH&S MS documentation.
OH&S MS supporting documentation
Your OH&S MS documentation is a list of all the information ISO 45001 requires you to make available.

This falls into two types:
| Type | What it means | Examples |
|---|---|---|
| Documents | living documents you keep up to date |
|
| Records | evidence that something happened |
|
Most organisations compile this into a single OH&S MS manual as it’s more convenient to prepare and revise. Like all good manuals, it doesn’t have to look fancy, but it does have to be complete.
If you want an example, check out this OH&S MS manual from a Saudi real estate company.

Note: The example above is not meant to be used as a template, just to give you more clarity on how an OH&S MS is tailored to fit the applicant’s operations.
Upcoming ISO 45001 revision
Depending on when you read this, you might want to know that an updated revision of ISO 45001 is expected to be published in the first half of 2027.

Based on the current draft, topics likely to get more attention include:
- mental health and psychosocial risks
- climate-related effects on workers, such as heat stress and extreme weather
- a stronger focus on prevention and safety culture
If you are developing your OH&S from scratch anyway, it might be expedient to incorporate the above points to make it easier to update once the new one is published.
Besides, mental health is a real problem, and your employees will thank you for it!
Generally, when a new edition is published, existing certificate holders are given three years to update their policies and get recertified (which is easier than a fresh application). As of publishing our guide, there’s no specific date yet, and if you need to be certified before that, you’ll still be measured against the current edition.
Certification steps
Each body sets its own specific process, but there are generally seven main steps:
| Step | Stage | Description |
|---|---|---|
| 1 | Questionnaire | Submit the questionnaire in the application package so the certification body can prepare a quotation. |
| 2 | Application | Accept the quotation, then submit the application form with the application fee. An audit team leader is appointed to your file. |
| 3 | Stage 1 audit | The auditors check your OH&S MS documentation and whether you are ready for Stage 2. |
| 4 | Stage 2 audit | Once Stage 1 findings are resolved, the auditors assess how well your OH&S MS is implemented and how effective it is. |
| 5 | Recommendation | After any nonconformities are verified as closed, the audit team leader sends a recommendation report to the Certification Panel. |
| 6 | Approval | The Certification Panel reviews and approves the recommendation. |
| 7 | Certificate | The certificate is issued once all fees are paid and the Certification Agreement is signed. |
How long this takes depends on the size of your operation, but as a general estimate, expect it to take 3 to 6 months.
Let’s go over some of these steps in slightly more detail.
Stage 1 audit
The Stage 1 audit is a paperwork stage to see if your OH&S MS documentation is adequate enough for you to proceed to Stage 2. Auditors will typically review your:
- scope
- policy
- hazard identification and risk assessment
- legal requirements register, and
- objectives
They then confirm that internal audits and management reviews are planned or done, and that workers are being consulted.
Stage 2 audit
The Stage 2 audit is a site visit to evaluate how your OH&S MS is implemented and where auditors verify that what your documents say is actually happening, so expect them to:
- inspect your site
- interview workers, including non-managerial staff
- inspect areas such as machinery guarding, PPE use, chemical storage and emergency exits
- review your incident records, and
- compare your records against your procedures
The audit team leader then prepares a recommendation for certification.
Or, more likely, they raise some issues first!
Addressing nonconformities
No matter how carefully you prepare, chances are the auditors will find areas that don’t meet the standard. These are raised as nonconformities, usually graded as:
- minor: an isolated lapse that doesn’t undermine the system as a whole
- major: a requirement is not met at all, or the system has broken down in a way that puts its results at risk
You will be given a deadline to respond with a correction and a corrective action plan that fixes the root cause. Certification bodies set their own response deadlines, so check your audit report.
The audit team leader will only recommend you for certification once your nonconformities have been verified. If the follow-up shows no further issues, your certificate will be issued, which is valid for three years.
And now you have your certificate, let’s see what it takes to keep it.
Surveillance audits
Once certified, you will have one surveillance audit every year (twice a year in exceptional cases) to confirm your OH&S MS is still being properly implemented and improved.
Surveillance audits are shorter than the initial audits and focus on sampled areas, recent changes, incidents and progress on your objectives.
Validity and recertification
Briefly, an ISO 45001 certificate is valid for three years, with a recertification audit in the third year that must be completed before the certificate expires.
Since your OH&S MS was already assessed during initial certification, recertification doesn’t start from scratch. Auditors review the system’s performance over the full three years and confirm it is still effective.
The ISO 45001, ISO 14001 and ISO 9001 link

Let’s first clarify what these three management system standards cover:
- ISO 45001 is for occupational health and safety, protecting your workers from injury and ill health
- ISO 14001 is for environmental management, controlling your impact on the environment
- ISO 9001 is for quality management, ensuring products and services consistently meet requirements
All three follow the same clause numbering and have many shared requirements, so one set of core procedures can serve all three. And as many companies that need ISO 45001 also need ISO 14001 or ISO 9001, it often makes sense to get them all done in one go.
Naturally, certification bodies often offer combined audits of two or more management systems, so one audit team can handle all your certification needs at a better rate and on a more convenient schedule.
Our advice is if you need two or more of the above, build an integrated system and apply together.
Alright, and now we reach the final section, and we apologise in advance as it boils down to ‘it depends’!
Certification costs
There is no fixed fee schedule for ISO 45001 certification, and each certification body will quote you an estimate that depends on:
- organisation size
- certification scope
- number of employees
- location
- whether you’re applying for other ISO certifications at the same time
Most certification bodies have an enquiry form that makes it easy to enter your details and receive a quote, so submit a few to find the best deal. Based on our experience, if you will need the help of a consultant as well, be prepared to spend around RM25,000.
Additionally, once certified, you can claim a double deduction on your certification fees.
How double deduction works
Under Paragraph 34(6)(ma) of the Income Tax Act 1967, as long as your certification body is accredited by the Department of Standards Malaysia, you can deduct twice what you paid from your taxable income in the year of assessment the certificate is issued
For example, if you spend RM20,000 on certification, you can deduct RM40,000 from your taxable income. At a 24% tax rate, that saves RM9,600; at 15% it saves RM6,000.
However, only fees charged by the certification body qualify. Consultant fees and capital expenditure (like machinery) don’t entitle you to double deduction but may still qualify for other tax benefits.
That’s it from us, and we wish you all the best with getting certified 😊
Let MISHU support your ISO 45001 certification
Directly and through our partners, MISHU regularly assists operations in Malaysia with applying for various licenses from district and federal agencies. Speak to us today if you’d like help getting your business ISO 14001-certified!